How to transcode JVC Everio TOD to Premiere Elements (no replies)
To celebrate the most romantic day of the year, Aunsoft Save $20 Best-selling Aunsoft SWF Converter and TOD MOD Converter are up to 80% Off for the first time, as well as MKV, FLV TiVo and DTS to AC3...
View ArticleUpgrading from old chained uboot on dockstar (4 replies)
So, I've got a dockstar that I installed Debian Lenny on quite a while ago. I used the old instructions back when they were the recommended method to install. I used a little USB HDD to run Debian and...
View ArticlePogoPlug E02 Black (13 replies)
hello every one i have bought my PogoPlug E02 black one one week ago and yesterday i tried to install uboot (/install_uboot_mtd0.sh) and then to install Arch Linux ARM but unfortunallty i go error...
View Articlenewer uboot for pogoplug series 4? (2 replies)
Hey guys. I have been very happy with my plug since I made the change to Debian, and have not had too many issues once I had it set up. Unfortunately, it seems that the system is very temperamental....
View ArticleDump flash contents through u-boot (no replies)
Hi guys, I've got a goflex net which I've recently had to recover and whilst I had some dumps, I've no idea of their origin as my original ones proved corrupt. I've also got a 2nd goflex net which is...
View ArticlePogoplug E02 - Cold boot works but reboot doesn't (5 replies)
I have a Pogoplug E02 and I installed uBoot through the script http://projects.doozan.com/uboot/install_uboot_mtd0.sh I'm trying to get ArchLinux running from a 4TB Western Digital MyBook, so I...
View ArticleDavy Gravy's uboot for series 4 mmc card (5 replies)
Having small issues with a fresh series 4 I picked up from adorama. Nothing too bad, followed instructions that are linked to my user name on the boards and didn't have any issues changing the...
View ArticleUpgrade older PogoPlug Mobile flash to newer? (8 replies)
Hi, I've come a long way to making NetBSD easy to install on PogoPlugs thanks to a lot of help from bodhi. My HOW-TO can be found here: Install NetBSD on a PogoPlug One of the things I've noticed is...
View ArticleBoot Problems Pogoplug E02 (no replies)
Hello guys, I have run into a problem with my Pogoplug. Until yesterday I was running the Arch Linux build which worked perfectly for me. But yesterday I tried to reboot and now I can't ssh into my...
View ArticlePogoplug E02 won't boot without archlinux drive connected (1 reply)
Hello, I've been successfully running archlinux for a while now on my pogoplug E02. I wanted to redo my whole drive and reinstall archlinux. So I powered down, disconnected the drive, and tried to...
View ArticleDockstar Jtag Help please (no replies)
Hello Here is my problem My Dockstar is connected in serial (CA-42) with Putty on Windows 7 U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB...
View ArticleOx820 device tree (30 replies)
Hi, I can't find proper device tree for an Ox820 device anywhere. The device is like Pogoplug V3 except double sata ports. Is it possible to get proper information for the device tree somewhere inside...
View ArticleNeed help booting to SD card for Pogo V4, stuck at "Starting kernel ..." (11...
I have the Pogo V4-A1-05 (which should be the same as Pogo V4-A1-01) I collected and followed the instructions to boot up via the SD card. The SD card has the ArchLinux image from...
View ArticleHow does U-boot set system frequency (2 replies)
Hi All, As U-boot first run, I imagine it will set system frequency at an early stage. Could anyone point me to where U-boot does it? I tried to look for it but couldn't find it. Thanks, Wei
View Article[How To] Use U-Boot SNTP (3 replies)
As requested by a forum member, here is the instruction how to setup SNTP using the new U-Boot. The envs can be setup either in u-boot console or in Linux . In this example, my router local IP is...
View Article2013.10 U-Boot for Pogoplug V3 (OXNAS) (no replies)
2013.10 uBoot for Pogoplug V3 (OXNAS) I'm starting this as a thread on U-Boot for Pogoplug V3. This U-Boot version was devleloped by kref/navym and available at kref GitHub u-boot-oxnas repo. And here...
View ArticleBricked Pogoplug V4-A3-01. JTAG? (9 replies)
Hello everyone, I'm new to you forum but I have been messing with Pogoplugs for a while. I have been fortunate enough to not need to use JTAG on any of them until last night. I was flashing the NAND...
View Articleuboot not loading/boot/uImage for archlinux (10 replies)
I am running davy's uboot to boot from an SD card. It works fine with bodhi's Debian rootfs. When I use an ArchLinux rootfs, it has trouble finding files, even though the files are there when I put...
View ArticleHelp, Pogogplug E02 , No LED,serial cable connected ,what next? (13 replies)
Hi, I messed up my pogoplug E02 while installing Archlinux and updationg the Kirkwood files somewhere along the line. No LED lights on fornt panel but I did connect an Rs232/usb cable to the jtag...
View Article[How To] Set U-Boot envs for USB booting with Kirkwood plugs (1 reply)
This is a basic but completed set of U-Boot environment variables that is good for booting Debian/Arch using USB. Please be aware that mistakes in changing U-Boot envs could block you out the box, so...
View Article