Bricked my i-Connect ? (2 replies)
I got an i-Connect and wanted to setup a small NAS/Audio server on it. I successfully installed ArchLinux, booting from an USB disk, following http://archlinuxarm.org/forum/viewtopic.php?t=1472. This...
View Articleolder versions of uboot and netconsole? (1 reply)
I've been running squeeze off a usb hard drive on dockstar since I acquired many years ago. Much to my chagrin the dockstar no longer boots off the original cloudengines firmware off internal flash...
View Articleflash gone bad or mere file corruption? (1 reply)
Much to my chagrin my dockstar would no longer boot off internal flash (but still can boot off external usb). I'd really like to have the internal flash work again because it just makes...
View Articleneed u-boot source for Kurobox/Pro (5 replies)
I have a Kurobox/Pro (based on Marvell 88F5182) and am very interested in the Kirkwood thread to amalamte all support for Kirkwood SOC's. I know the 88F5182 is NOT Kirkwood but given a Kurobox/Pro...
View ArticleUnbricking OMNINAS kd20 (oxnas820) (5 replies)
I have Shuttle Omninas kd20, and I managed to screw its u-boot image in NAND. So it does not boot into u-boot from NAND anymore. The board does have serial header (which I am using), but no JTAG...
View ArticleLatest uBoot for Pogoplug Mobile? (9 replies)
I just picked up 4 Pogoplug Mobiles from Ebay for a little less than $6 each shipped. What's the latest and greatest uBoot for the Pogoplug Mobile? Would it be davygravy's posted here -...
View ArticlePogoplug Mobile - Booting default Pogoplug OS in NAND (4 replies)
Hello, Quick disclaimer, I'm new to uBoot and Linux booting so please bare with me. I've been looking into booting the default Pogoplug OS from davygravy's uboot. Basically I'm looking for similar...
View ArticlePogoplog Mobile - contents of default MTD partitions (no replies)
Hello, The default mtd partition layout for the Pogoplug Mobile is the following: #cat /proc/mtd dev: size erasesize name mtd0: 00200000 00020000 "u-boot" mtd1: 00300000 00020000 "uImage" mtd2:...
View ArticlePogoplug v2 Uboot woes (5 replies)
I've been reading through these forums for a few days and cannot figure out my issue. I have a pogoplug v2 that I've been running happily as an arch server for about 4 years. The other day, I lost...
View ArticlePogoplug Mobile V4-A1-01 troubles (11 replies)
Hello, I just bought my first pogoplug, and decided to play around with it. I follow the directions at archlinux for the Pogoplug Series 4. After I was done, I was left with a flashing green light. I...
View ArticlePogo E02 will only boot with USB drive (3 replies)
Hi, I just got another Pogo E02 and installed Archlinux and associated apps with no problems. It boots fine if I have the USB flash drive connected. The problem is when I try to boot it back into the...
View ArticlePogoplug v4 / mobile on bodhi's latest build wont start linux (3 replies)
Hi all, hope you can help. Awsome job on suporting debian on these devices! I followed all the steps on http://forum.doozan.com/read.php?3,12381 to install uboot - it worked great, I have uboot...
View ArticlePogoplug V4 original MTD partitions (2 replies)
Since a lot of people have been getting the Pogo V4/Mobile lately, just thought I'd repost the download link to one of my Pogo V4s original MTDs here. In case anybody wants to revert to stock, and...
View Articleno led, serial not working (1 reply)
hi, i have a pogoplug e02 (pink). i have installed an archlinux and played a lot with different installs. A half year ago i tried a new boot loader and after that i was not able to boot the device any...
View ArticleGrub for ARM u-boot (no replies)
I'm curious if anyone has tried grub for ARM u-boot on a kirkwood box? https://wiki.linaro.org/LEG/Engineering/Kernel/GRUBonUBOOT
View ArticlePogoplug v4 Hangs at "Waiting for storage device(s) to settle" (3 replies)
Model: POGO-V4-A1-01 1 x USB 2.0 1 x SD Using Seagate 3TB external HD, model STBV3000100 I went through the setup instructions which worked well except that fdisk had issues partitioning my drive. I...
View ArticlePogoplug Mobile NAND messed up pretty decently :) (5 replies)
Here's my setup: -Pogoplug Mobile (plugged in and activated to get in via SSH) -Arduino Uno R2 as Serial connection, soldered I've been 'playing' with hardware and software for quite a couple of...
View ArticleHelp: Fresh install Pogo Mobile hangs at "Starting Kernel ..." (12 replies)
A little about me- I'm a complete noob with Pogoplug's and Uboot, but I have a lot of experience with Debian Linux and CLI. Ok so, I installed Uboot on a new Pogoplug Mobile(v4) and Debian on USB...
View Articledmesg bad block detected (2 replies)
While looking at dmesg saw this..... [ 6.756660] Scanning device for bad blocks [ 6.820850] Bad eraseblock 808 at 0x000006500000 The device seems to be running debian fine as of now. Should I be...
View ArticleExploiting the PogoPlug Mobile (2 replies)
Didn't think this fit anywhere else, hopefully someone already saw this - VERY helpful :) GTVhacker Pogoplug Mobile The PogoPlug has an open bootloader and its kernel drops to a root shell making this...
View Article
