Hi,
I messed up my pogoplug E02 while installing Archlinux and updationg the Kirkwood files somewhere along the line. No LED lights on fornt panel but I did connect an Rs232/usb cable to the jtag connector on the box and was able to get the following:
U-Boot 2011.12 (Feb 20 2012 - 21:21:59)
Pogoplug E02
SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot: 0
No link on egiga0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
u-boot>>
What can I do next to revive this box if possible. I do have the original Pogoplug MTxx files that I backed up before attempting the mod if that helps. I'd really like to try and revive this machine instead of tosssing it out.
Any help of direction would be appreciated.
Thank you
I messed up my pogoplug E02 while installing Archlinux and updationg the Kirkwood files somewhere along the line. No LED lights on fornt panel but I did connect an Rs232/usb cable to the jtag connector on the box and was able to get the following:
U-Boot 2011.12 (Feb 20 2012 - 21:21:59)
Pogoplug E02
SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot: 0
No link on egiga0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
u-boot>>
What can I do next to revive this box if possible. I do have the original Pogoplug MTxx files that I backed up before attempting the mod if that helps. I'd really like to try and revive this machine instead of tosssing it out.
Any help of direction would be appreciated.
Thank you