Pogoplug E02 Bad Block (5 replies)
My Pogoplug E02 have Bad Block. I followed instrution from this post http://forum.doozan.com/read.php?3,5728,5748#msg-5748 and got it to work/boot off a USB drive. However, I cannot get back into the...
View ArticleU-Boot loading compressed uImage (7 replies)
What compression does u-boot 2013.11 support for uImage if any?, i tried lzma2 and it didn't boot.
View ArticleNot booting off of a WD 3TB drive (3 replies)
I've spent the last few hours, nights, days trying to figure out why my pogoplug will not boot off of a 4gb ext3 partition on a 3 TB wd element drive. I finally gave up and loaded everything on a...
View Articleno ssh sccess to pogoplug (E02) (1 reply)
I am not able to get SSH access on pogoplug E02. I set password on my.pogoplug.com for SSH, but on local IP i am not able to access the SSH using the password. I keep getting the error as "Permission...
View ArticleBoot from usb partition with name rootfs (3 replies)
I have a wheezy installation on an external hdd which I want to use on a pink pogoplug. I labeled the rootpartition rootfs, and now would like to boot from this partition even if the other usb hdd are...
View ArticleDockstar: Should I update uBoot? (4 replies)
I have a 2.6 kernel and Debian Squeeze running fine on a USB 2GB stick. I want to install a fresh Wheezy on a different USB stick and switch back and forth while I get the new stick configured....
View ArticleJeff's uBoot, installed, can't mount /dev/mtdblock3? (no replies)
I just need a little help or clarification. I've got a Pogo-E02 that I've installed Jeff's uBoot successfully. Although I'm currently not boot and running an OS off a USB drive, I'd like to play with...
View ArticleSimple way to boot SD card on PogoPlug Mobile? (1 reply)
Hi, After going around in loops many times trying to find u-boot images I can test via tftp (since picocom doesn't ever download anything), I'd like to ask for help. Neither of these will work on a...
View ArticleCold Boot works but reboot does not - Try this (no replies)
I want to promote this potential solution from RomanG: QuoteSo I again reduced bootdelay variable from 10 sec to 2 sec and now it boots consistently from either cold reboot or warm reboot. from this...
View ArticleGoflex Home Semi Bricked (no replies)
Hello I´m new in the forum i´m from portugal so sorry for my poor english I have a goflex home 1tb and i try to put archlinux on but someting wrong, dont boot the green light blink and dont boot, i...
View ArticleKirkwood U-boot - Getting all supported Kirkwoods on-board (3 replies)
@bohdi @davygravy Gents, Shall we work on getting all known and linux supported Kirkwood based boards into one tree, especially those that we don't have an existing consolidated codebase? Get these...
View ArticleConditionally boot with PogoPlug original U-boot? (no replies)
Hi, I've figured out that if I write my NetBSD kernel into the 8 meg to 16 meg section of a PogoPlug Mobile's flash (the area referred to as "failsafe"), the PogoPlug's GNU/Linux can still boot just...
View Articlereverse brick? (no replies)
Hi, I have a pogo E02 that I can only boot with a USB stick. If I remove the usb stick and wifi dongle and plug in the ethernet cable the LED never lights up. I cannot boot into the rescue system. I...
View ArticlePogoV4-A3-01 troubles (2 replies)
I need some ideas. It's very late. I'm probably missing something trivial and its driving me crazy. I got this Pogo just a little while ago so it's my newest toy. Over the weekend I got it booting...
View ArticleConditional boot with DLINK DNS325 original U-boot (2 replies)
Hello. I am trying to do conditional booting (USB -> HDD -> NAND) using *only* original U-boot. I tried this: setenv uImageAddr 0xa00000; setenv uInitramfsAddr '0xf00000' # from USB setenv...
View Articlebad crc and ro serial console unbrick? (5 replies)
I tried to restore uboot to facotry and ended up with bad checksum. I messed up the pad by the rx pin so i cant write from serial console. here is what happens on boot: U-Boot 1.1.4 Cloud Engines...
View ArticleIs there a newer u-boot for Netgear Stora (RD-88F6281A LE) (no replies)
Dear all, hello everyone. I'm wondering if there is any possibility for upgrading a u-boot in my old Netgear Stora? Right now it's running on U-Boot 1.1.4 (Sep 4 2009 - 09:36:11) Marvell version:...
View ArticleBoot hangs at "booting the kernel." (6 replies)
I have a GoFlex Home that I have been trying to get working with Debian. I have the "kirkwood-debian_rootfs.img" (from davygravy:...
View ArticleYet Another ARM! (no replies)
Greetings, Love the forum, I have two plugs (E02 and v4). Seems like I wound up here on more than one occasion during their setup. Well as fate would have it, I got my ultimate wish, sorta... A third...
View ArticleNew U-Boot option for Pogoplug Series 4/V4 (1 reply)
After a couple of years of prevarication, I have finally got around to producing a U-Boot for the Pogo V4 that I'm vaguely happy with. It is similar to the ALARM version, in that it is based on the...
View Article