Bootloader fail (no replies)
Attempted to upgrade both a dockstar and a pogo E02 that I had previously installed Jeffs 2012 bootloader script on. Both installs appeared to "take" as expected and both units now will boot into...
View Article[NSA325V2] Bad blocks on mtd0? (3 replies)
Hello everyone! I was going to update uboot, kernel and debian on my NSA325 v2, but it seems i have got some problems. I am running Uboot root@nsa325:/# strings /dev/mtd0 | grep U-Boot U-Boot 1.1.4...
View ArticleBoot inspite of net console without LAN connection (no replies)
Hello! I finally have my print server working with a new wifi usb device (TP-Link 4200). Now I want to sometimes switch the device on an use it as a scan and print server. But U-Boot won't boot...
View ArticleUART Boot DNS-320 B1 with broken NAND (3 replies)
Hi there. Ive got a Problem with my old D-Link NAS. The NAND Flash is broken and i hoped that i can Boot it via UART and maybe solder in a new NAND Flash or boot from USB. The NAS is a DNS-320 rev.B1...
View ArticleHowto: Use qemu to simulate Oxnas (OX820) Pogo V3 to run U-boot and Kernel...
I want to use qemu to virtualize a pogoplug. I have compiled qemu-system-arm (version1.05) and u-boot.bin that support the ox820 board . but I don't know what to do next, such as how to set the...
View Articlehttps://shopdumps101.com/sell dumps - dumps with pin - good dumps valid 100%...
selling dumps cvv fullz selling cvv fullz track 1 and 2 bank login bank transfer writing checks transfer to cc … Fresh Cards. Selling Dumps, - Hi all ! Welcome to my services:...
View Articlehttps://shopdumps101.com/ Sell Dumps – Shop Dumps – Dumps With Pin – Good...
SELL DUMPS TRACK1/2 - SELL CC FRESH - SELL USA FULLZ VERIFIED - SKIMMER - HACKING - CARDING - DUMPS VALIDS 100% Hello all best buyer We hacker group Anonymous and we working internet 24/24h , we get a...
View Articlehttps://shopdumps101.com/Sell dumps, Shop dumps 101, 201,dumps with pin, Atm...
https://shopdumps101.com/sell dumps,dumps with pin track1&2,sell dumps online. valid rate 98%.....!!!!! Selling dumps - shop dumps - dumps with pin - sell dumps online Contact me - ICQ : 690616620...
View ArticlePogoplug 4 uboot update won't boot (17 replies)
Bodhi , I have a Pogo4 with Arch updated Uboot and Arch and now it won't boot with SD card. I have an old flash drive with Arch on it and it will boot from that but not from the SD card with the...
View ArticleHow to unbrick GoFlex Home? (84 replies)
I have a GoFlex Home that won't boot. I've connected it to a terminal via a USB to UART, but I can't get any output from the device. (I've tested that the CP2102 interface works, because messing with...
View ArticleuBoot version (2 replies)
How do I identify the uBoot version I have installed on my GoFlex Home unit?
View ArticleDLink DNS-325 second disk problem (no replies)
Hi everyone I compiled and flashed u-boot 2018.07 with dns325_defconfig to my device It could'n see second ide device U-Boot 2018.07-dirty (Sep 19 2018 - 22:32:33 +0300) D-Link DNS-325 SoC: Kirkwood...
View ArticleBricked or not, that is the question :/ (no replies)
hi all, i recently flashed my stora with the latest uboot from https://forum.doozan.com/read.php?3,12381,12381#msg-12381 all was ok, netconsole was working ok, etc.... But ( as i am a noob :=0 ) i...
View Articledockstar uboot upgrade: mtd0: Read-only file system after nanddump (3 replies)
Plan to upgrade uboot according to instructions: https://forum.doozan.com/read.php?3,12381 but can't use command in /usr/sbin directly, it shows" -bash: fw_printenv: command not found" after...
View ArticleNeed original u-boot for GoFlexNet (no replies)
I wasn't able to make a copy of the original u-boot (U-Boot 1.1.4 Cloud Engines 1.1.2 (3.4.22))on my GoFlexNet. I had to install bodhi's latest u-boot via tftpboot since I could not run kwboot. Is...
View ArticleNSA-320 kwboot doesn't work; hangs after fully sending image (1 reply)
Hello, I'm trying to upgrade my ZyXEL NSA-320 u-boot to prepare it for debian/openmediavault. Before doing anything I wanted to make sure kwboot works, so I am trying to kwboot both the new u-boot and...
View ArticleI can`t boot my Goflex net (no replies)
Hello. For some time trying to install Debian on GoFlex Net and do not succeed. Can anyone guide me? At the moment I created a falsh with a rescue linux system on which I can boot. U-Boot, is updated...
View ArticleNSA325v2 How to write U-Boot by JTAG to NAND (no replies)
Hi, After flashing by RS232 my Zyxel is dead. Not booting and RS232 not working, only reseting after 30 sec. Unbrick method by USB not working. How to connect JTAG to pcb (pinout) and write u-boot ?...
View ArticleHow to unbrick the Netgear Ready NAS Duo v2 (no replies)
Hi All ! Yesterday I bricked my oldest Netgear ReadyNas Duo v2 and need help for repair her. I was try to upgrade u-boot loader to 2017.07 (https://forum.doozan.com/read.php?3,12381) and NAS going to...
View ArticlePogoplug v4 not booting - Serial output (no replies)
Hello, I am new to pogoplug and the first one I bought has never worked properly. I finally figured out I can use a serial connection to it to see what the problem is. But I can't seem to find any...
View Article