I have a GoFlex Home that won't boot. I've connected it to a terminal via a USB to UART, but I can't get any output from the device.
(I've tested that the CP2102 interface works, because messing with the TxD and RxD gives me junk values on the screen. Also, all the indicators on my CP2102 interface are active so there's nothing wrong with the physical connection.)
The GoFlex however, just keeps blinking the green light forever, with no output to the serial console. I think my GoFlex is bricked.
What created this problem? Probably when I accidentally typed the commands:
Is my GoFlex actually bricked?
In reply to https://forum.doozan.com/read.php?3,12381,12381#msg-12381
(I've tested that the CP2102 interface works, because messing with the TxD and RxD gives me junk values on the screen. Also, all the indicators on my CP2102 interface are active so there's nothing wrong with the physical connection.)
The GoFlex however, just keeps blinking the green light forever, with no output to the serial console. I think my GoFlex is bricked.
What created this problem? Probably when I accidentally typed the commands:
fw_setenv help fw_setenv -helpNeither of these gave me any output and when I rebooted it just got stuck on the infinite blinking green light.
Is my GoFlex actually bricked?
In reply to https://forum.doozan.com/read.php?3,12381,12381#msg-12381