Help with Docstar 2017.07 U-Boot Kirkwood installation (2 replies)
Howdy, I run Linux and have a couple of D-Link, DNS323 and DNS320, NAS on the Lan, running Alt-F firmware. Recently, I picked up a STDSA10G-RK Dockstar in an unopened box and was able to disable the...
View ArticlePogoplug Pro Boot issues, maybe bricked? (4 replies)
tried installing Debian overstock software and it was getting stuck during boot at some point. Redid the rootfs usb stick and now all I get is some gibberish with Reset IDE SATA PHY not ready. It also...
View ArticleHelp installing 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) (3 replies)
Sorry to keep bothering , but when i run : /tmp # ./fw_printenv > current_envs.txt Cannot read bad block mark: Invalid argument i must be doing something wrong , but i have no idea. any clues? best...
View ArticleCant find PogoPlug pro on network. Cant ping or ssh to it. (no replies)
Hi, I recently decided to give my popoplug pro another try after abandoning the project two years ago. I want to set it up as an owncloud server. I need help to SSH back into it. I can't find the plug...
View ArticleHelp with installing 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) (1 reply)
Hi Bodhi, Thanks for the confirmation! everything went great until step 6. PROBLEM: Step 6: /usr/sbin/flash_erase /dev/mtd0 0x0 6 My OUTPUT: Erasing 128 Kibyte @ 7f647f5c00000064 -- 6 % complete I was...
View ArticleChanges in SD Card access in U-Boot 2017.07-tld-1? (no replies)
After a few days of learning from failure, I think the only remaining issue is boiled down to uBoot. Background: Pogoplug V4 was running 2014.07-tld-1 upgraded to 2017.07-tld-1,l SD Card boot When I...
View ArticleU-Boot 2015.10 for Iomega HMNHDCE (4 replies)
In the thread "2015.10 U-Boot for Pogoplug V3 (OXNAS OX820)" DaveP mentioned, that this U-Boot breath new life into Iomega HMNHDCE NAS. Is there somebody, who knew how to do it? QuoteDaveP Re: 2015.10...
View ArticleHelp with Netgear Stora u-boot installation (1 reply)
Hello! I have Netgear Stora. login as: admin Stora version 10.0.x -bash-3.2$ cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00600000 00020000 "uImage" mtd2: 0f900000...
View ArticleBoot Debian from USB on Zyxel NSA310 (no replies)
I prepared me an USB drive with Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2 following this instructions. Now I can boot Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2 (uImage and uinitrd read...
View ArticlePogoplug v3 Networking (no replies)
Here is my situation, I am now setup at home to run my network tethered to my cell phone as the cable provider I was using was unreliable at best, that being said I have found no way to connect my...
View ArticleWhich OS can be embedded on GoFlex Home (no replies)
I would like to have the option of being to boot up my GoFlex Home from NAND without needing external storage. As far as I am aware the only two options are running Stock or OpenWrt. Is there anything...
View ArticleMissing new thread (no replies)
All, There was 1 new thread that might have been deleted by mistake while I cleaned up spam! If you have recently created it and it was gone, please repost it.
View Articlensa 325v2 vs debian noob questions (46 replies)
Hiya, i own a nsa 325v2 and would like to install debian on it, just i have some questions i cannot seem to find the answer anywhere, so if there's some sort of noob guide i've missed, please gimme...
View ArticleUnderstanding U-boot environment variables (1 reply)
I often see displays of various environment variables but never pay much attention to them apart from a few specific ones, but I'd like to know if there is a definite reference for them and what they...
View ArticlePogoplug V3 SATA direct booting (no replies)
I've updated the u-boot release thread to add a link to where to download the SATA direct booting files. QuoteReferences: ... 3. SATA direct booting tarball.
View ArticleStock u-boot fpr NSA325 V2 (no replies)
I've updated my NSA325 V2 to the new u-boot and had not make a backup of my mtd0 :( Can someone provide me the stock mtd0.
View ArticleRescuing a dud PogoPlug E02 (no replies)
My roommate happened to unplug the Pogoplug cable, and after that it doesn't come back up. I set it up around four years ago, so I don't remember exactly what I did, but I did install Jeff's Rescue...
View ArticleDebian on Freecom Silverstore 2 NAS (3 replies)
Hi, Quite recently I have acquired two NAS units "SiverStore 2" manufactured by Freecom. The units are EOL, so no updates on the software side since 2012. However, I have received the root password...
View ArticleChanging boot sequence for making stubborn SSD (bad firmware?) boot. (23...
Hi Bodhi! It's me again, with that annoying Transcend SSD. The problem is, that this SSD doesn't work reliably after the IDE reset. Sometimes it's working and some times it's timing out. This is not...
View ArticleUboot 2017 - Goflex home won't boot (1 reply)
Hello, I have goflex home and a running lastest version of archlinuxarm here http://os.archlinuxarm.org/os/ArchLinuxARM-kirkwood-latest.tar.gz But after i installed your uboot -...
View Article