/boot/uEnv.txt ignored (1 reply)
I have a FAT partition on a USB stick which is not being read using normal envs. Can't understand why... envs:- uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr...
View ArticleNSA325 not booting after uBoot installation from stock rom (1 reply)
Hello Forum, I've tried to flash my NSA325 from stock rom to Debian. Based on what I've read I thought I have to flash first the uBoot, which was successfully. My serial interface boots up with U-Boot...
View ArticleNSA-310 How to (2 replies)
Hello, I have an old NSA310 nas and would like to install debian. Still with stock firmware. No uBoot, nothing. It seems that all detailed guides pointing to forum.nas-central.org which is not working...
View Articletftpboot & loadderdev (no replies)
Here is my latest attempt to boot a recently built version of FreeBSD/ARM for the GoFlex Home using tftpboot:- Hit any key to stop autoboot: 0 GoFlexHome> setenv serverip 192.168.1.1 GoFlexHome>...
View ArticleAddress in SROM (no replies)
I'm not sure of the origin of my current ethaddr but it does not corresond with the MAC address on the base of my GoFlex Home unit, so I thought I'd change it using setenv... but was surprised to see...
View Articleenvironment.img (1 reply)
How do you create an environment.img from a text file? I have looked for instructions but haven't come across any.
View ArticleHowto reset envs to uboot.2016.05-tld-1.environment while in netconsole (3...
In this instruction, the Pogo E02 is used as example. The current installed u-boot is uboot.2016.05-tld-1 or later. It will work if you have uboot.2016.05-tld-1 or later installed on your box. Earlier...
View ArticleU-Boot for Buffalo Linkstations (7 replies)
Hello everyone, I am still having some older Buffalo Linkstations lying around that I like to set up similar to my other NSA325. Due to restricted hardware I only like to use those as NFS-servers for...
View ArticleU-Boot for Pogoplug Pogo E01 (003-SP1001) (16 replies)
I want to update the U-Boot. How to do it correctly for my model? Need uboot.2017.07-tld-2.sheevaplug.bodhi.tar ? Thanks. U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC:...
View ArticleNSA320 Bad eraseblock (11 replies)
Hi everyone, first of all thx for all your work, you are doing a great job! I'm trying to install uboot on my zyxel NSA320 device, but during the check for the bad blocks I'm getting this message:...
View Articleopenwrt using Bodhi's uboot (2 replies)
Hi, I have dockstar and Goflex home with Bodhi's u-boot. Can I boot openwrt with OS on external usb without writing it on local flash? If yes, how?
View ArticleNAS326 how to boot with UART? (1 reply)
Hello, I'm new to the forum. I have a Zyxel NAS326 with a physically damaged NAND memory - it does not save the configuration. I want to buy a new memory, unfortunately I do not have a programmer to...
View ArticleNSA325 flashing questions (no replies)
Hello, I bought a couple of 4TB WD disks for my NSA325, which I want to use in RAID 1 and decided that it's a good time to make the box more configurable by either installing a proper Linux...
View ArticleNew uBoot for PogoPlug V3 question (1 reply)
Hi, i was playing around with the pogoplug V4 in uboot and found the nice sntp (and other) commands to setup time during boot. I tried that on the Pogoplug V3, but the exisiting SATA uboot version...
View ArticleBad eraseblock - Save to flash U-Boot (no replies)
Hi all, I am looking at upgrading the ootb U-Boot of my NSA325 to the latest release from this forum. Howver when I check for bad eraseblocks in dmesg, I get following result: [ 2.047146] nand:...
View ArticlePogoplug Mobile with ArchLinux, MMC uBoot, and Rescue (2 replies)
I recently picked up the Pogoplug Mobile I had laying around that had ArchLinuxArm booting up via the MMC enable uboot from here: https://forum.doozan.com/read.php?3,7477,7553 and the NAND rescue...
View ArticleCan't write uboot env after upgrade to Debian Buster (1 reply)
I have a strange issue since upgrading to Debian Buster... The MTD setup by the kernel is messed up. It doesn't match the definition passed by uboot from the command line. And the partitions are set...
View ArticleConfigure uboot to leave serial console ttyS0 to Linux (3 replies)
Hi, I have been a regular reader on this forum for many years and might even have posted something here some years ago. But I don't remeber clearly. Anyway: Big thanks to Bodhi and other active...
View Articlefw_setenv not storing parameters (3 replies)
Hi. I use uboot 2011.5 (or 2012? I have to double check later). I'm booting Debian via USB stick, everything is working fine so far. But there seems to be a problem with UBootEnvVariables: some...
View ArticlePogoplug v4 not starting (1 reply)
I haven't used my pogoplug with Debian for almost an year. I have tried to switch on today and found the green light glowing, but can't find in network. I found the below log from netcat. The OS...
View Article