recovering a pogoplug from a failed (quasi-bricked) linux installation...
Some time ago (maybe two or three years) I have (quasi) bricked a Pogoplug E02 Model attempting to install Debian on it. I leave it as I was since I haven't the skill to "repair" it. Now a friend of...
View ArticlePogo V4 installation problem (1 reply)
Hi and thank you for the great work you've done. I've used it as a road map, but I realized a few problems near the end. I have a pogo-v4-a3-01 I've read your work and also Qui's (7/2014...
View ArticleGoflex Home bricked after installing Uboot (11 replies)
Thank you for your attention and please forgive my poor English. I installed ArchLinux ARM on my goflex home, well, it ran well but it's slower and slower recently, so I wanted to go back to the stock...
View ArticleZyxel NSA320 Debian HDD LEDs (3 replies)
Hi, after some struggling with the uboot upgrade, that works fine and debian is booting:-) It's not absolutely importand, but nice to have: The HDD Leds... root@nsa320-debian:~# echo ide-disk2 >...
View ArticleGoFlexHome Maybe Bricked (5 replies)
So first thank you for these forums seems like a lot of good info and was enough to think I could follow along and migrate from Arch to Debian. My setup had been to boot Arch off of the HD mounted on...
View Articlehow to switch netconsole back to serial? (3 replies)
Hello, i have two nsa320's, that i both want to update to latest u-Boot. The process went fine on one NSA, but on the other one i have some issues: Right now there are no harddrives installed, but i...
View ArticlePogoplug mobile (2 replies)
i bought two pogoplug mobiles a few years ago and apparently i activated ssh on one of them but i don't remember the pw. am i right to assume this bc ssh port 22 is open and i can send curl commands...
View ArticleEnable SSH Access not found in the Settings page (Pogoplug V4-A1-01) (2 replies)
Hi, Just received my Pogo today and have successfully activated it. But in the settings page, I do not see the "Enable SSH Access" option. Anyone knows why? Is there any other way to enable it? I...
View ArticleNSA325V2 u-boot installation - Problem with permission denied (3 replies)
Hello! I'm trying to install the newest U-Boot 2016.05. Part "A. Flashing Instruction:" doesn't work for me ("flash_erase /dev/mtd0 0 4" results in an error message). A little bit of googling got me...
View ArticleGetting error trying to install uboot on pogoplug V4 - already flash...
Hello! I initially had a pogoplug that I had used the Qnology guide to install uboot about a year and a half ago, it worked great. Unfortunately, the pogo had an accident so I bought a new one...
View ArticleAfter update to u-boot 2016.05-tld-1 on NSA325v1 is not booting (1 reply)
Hi there, I've been reading here for a long time and I dared yesterday to change the u-boot from 1.1.4 on one of my two NSA325v1. So I used a serial connection to my Mac and updated the u-boot as...
View ArticlePogoplug - uBoot Debian vs Stock (8 replies)
Hi, When I got my pogoplug I installed uBoot on my pogoplug to run debian because I thought I had to; now I reallize this might have been a mistake. Pogoplug seems to run a weird proprietary version...
View Articlevariable for booting from sdcard on pogoplug mobile/v4 (2 replies)
I was having trouble getting one of my plugs to boot from the mmc card - just getting an error. after carefully reviewing the env.config I noticed that the bootcmd_mmc variable is missing in the file,...
View Article2016.05 U-Boot Kirkwood - Can't set ethaddr (5 replies)
Hi, I can't change my ethernet address using root@debian:/share# fw_setenv ethaddr "XX:XX:XX:XX:XX:XX" Can't overwrite "ethaddr" I tried even after reboot
View ArticleHow to use usbboot? soft-bricked v4 pogoplug (2 replies)
Hello all. I tried to install the lastest version of uboot and switch over to sd card booting on my pogoplug, but I messed up somewhere and it doesnt boot on its own. There are no lights by default,...
View Articlehttp://validdumps.net/shop dumps,dumps with pin,shop dumps online (no replies)
http://validdumps.net/ Dumps shop,dumps with pin track1&2,sell dumps online. valid.....!!!!! Selling dumps - dumps shop - dumps with pin - sell dumps - Gmail : maryabbate128@gmail.com - Skype :...
View ArticleHelp with Pogoplug v4 – blinks green for ten seconds and reboots in a loop...
Bodhi and everyone else here: you've done some amazing work. I wanted to honor that and not end up needing help but... I started to flash my Pogoplug v4-A3-01 years ago with some tutorial but...
View ArticleHow to flash new uboot from boot console (5 replies)
@bodhi, I saw somewhere a post that flashing uboot and/or uboot env is also possible in the boot console (stop bootup at the beginning) using files from a connected usb stick. I have Goflex Net device...
View ArticleBUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not...
Followed this thread http://forum.doozan.com/read.php?3,16017 to update my pogoplug pro's uboot. The Uboot I used for my pogoplug Pro: uboot.2015.10-tld-1.ox820.bodhi.tar Followed the flashing...
View ArticlePogoPlug P21/v3 Unable to Boot after U-Boot Update (2 replies)
Hey folks, New to the forums here, so forgive my ignorance with what I'm doing with my PogoPlug. Long story short, I've got a box that has the 2013.10-tld-4 U-Boot installed (seems I upgraded it...
View Article