[TOOL] Finding address of stock envs of fw_printenv (no replies)
I made this simple script that will run fw_printenv sequentially on all possible flash sectors in the first two mtd partitions, to identify where are stock uboot envs even if you are not using stock...
View ArticleBuffalo LS421DE Password for root via Serial Console/Reset root password/Boot...
I replaced PID device dumpnf > /tmp/nas_feature sed -i 's/PID=0x0000300С/PID=0x00002025/g' /tmp/nas_feature setnf < /tmp/nas_feature After restarting it disappeared in the network. BootLog via...
View Articleuboot NSA310 - probably erase uboot (19 replies)
Hi, I think I kill my uboot when I try test latest changes in LEDE: I follow the procedure: https://github.com/lede-project/source/pull/656#issuecomment-274945142 I compile the uboot:...
View Article[testing]Can someone with nsa325 test this uboot? (2 replies)
I'm adding support in LEDE for the NSA325 (basically cloning bodhi's patches and adapting them a bit to work into LEDE's build system), and as you know the NSA325 has a hardware watchdog. I tried to...
View ArticleTrouble booting and SSH into USB (Arch linux) with Pogo E02 (5 replies)
Booting and SSH-ing issues into Arch Linux in POGO.... It boots into the Pogo OS fine and provides the correct IP to ssh in, but once I plug in the USB (on the top port) and do a busybox reboot, it...
View ArticleForgot to erase flash before writting uboot. Bricked? (12 replies)
Hello. I was upgrading my uboot to last version, but I forgot to erase the flash, i.e., to do: flash_erase /dev/mtd0 0 4 I did all the following steps. Now I can not boot. Is my dockstar bricked? Thanks.
View ArticleHow to see version of uBoot? (2 replies)
Simple question: how can I find out which version of uBoot I am using? I lost track which Pogolug has which version and have forgotten if I installed the new version. Thanks, Rainer
View ArticleProblem booting with Arch U-Boot 2016.09.01-1 (2 replies)
Hello all, and firts, sorry for my english I have a Pogoplug E02 device running perfect for 2 or more years,(Archlinux installed) suddenly, in a very clever move from my ingenius brain, decide to...
View ArticleGoflex upgrade uboot auto-script fail! (1 reply)
Dear friends, While I'm upgrading u-boot on Goflex Home I get error " HTTP request sent, awaiting response... 404 Not Found 10:11:07 ERROR 404: Not Found. " See log file attached for detail. I think...
View ArticleHelp unbricking Pogo E02 (no replies)
Hello guys.. I managed to restore uboot image after a wrong installation in a Pogoplug e02. I have serial access and this is part of the output of printenv: PogoE02> printenv arcNumber=3960...
View ArticleProblem booting NSA325v2 on HDD (1 reply)
Dear bodhi, first of all a big thank you for your great work! I used your 2016.05 U-Boot on my NSA325v2 and everything went fine so far. I am also using your...
View ArticlePogoPlug serial troubleshooting (3 replies)
First, big thanks to all of the work and information put out there by the community. I've really enjoyed being able to learn and hack on my PogoPlug with just reading everything out there. I was...
View Articlehow to set env to realize sd card boot for pogo v4? (1 reply)
how to set env to realize sd card boot for pogo v4?
View ArticleHow do I get out of my Pogoplug Mobile rathole? (3 replies)
I began my journey looking for an inexpensive device to use as a DDNS client. I stumbled on Qui's blog and it sounded like an easy way to go. I bought a Pogoplug Mobile (POGO-V4-A1-01) and away I...
View ArticlePogo V3 - No boot, no serial communication (2 replies)
1st time on this board with the following situation here. It seems that I have a "dead" pogoplug V3 here. Tried to contact this with a JTAG/Serial connection, but no positive results. Reading this...
View ArticleThinking about upgrading my Pogo E02 U-Boot. (5 replies)
When I got this Pogoplug, I followed the Qnology blog to modify the U-Boot. Using netconsole I got version of U-Boot that is currently installed: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02...
View Articlehow to upgrade ram on marvell a38x nas (2 replies)
I replace original 512mb ram chip with 1gb ram chip, and read f1001410, f1001504... original ram register value. disassemble u-boot.bin, search for initializing code. I can't find any related code to...
View ArticlePogo Oxnas V3 with 256MB RAM modding (15 replies)
I have enlarged mem to 256MB, the original u boot only recognize 128M does your uboot support all 256M?
View ArticleNSA310 Installation Problems (4 replies)
Greetings, I am trying to get Debian on a Zyxel NSA310. I have flashed u-boot to 2016.05 but haven't had success in getting this to boot off of a USB flash drive. Below is my POST and printenv. Any...
View ArticleTutorial of pure sata boot pogoplug pro (1 reply)
I summed up the old post about sata boot for pogoplug pro and fixed some broken links Just for reference to others, I made a very detailed summary. Please revise my comment are there right in...
View Article