Install u-boot on NSA310 question (9 replies)
Hi, I have Zyxel NSA-310 and I have installed : U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:19:43 -0800) ZyXEL NSA310 1-Bay Power Media Server Can I upgrade to the latest version of uboot "2016.05 U-Boot...
View ArticleOpenWRT 2nd stage u-boot problems on Pogoplug-E02 (8 replies)
As per the instructions at "https://wiki.openwrt.org/toh/cloudengines/pogoplug" I flashed the OpenWRT 2nd stage u-boot onto my Pogoplug-E02 to be chainloaded by the stock Cloud Engines...
View ArticleZyXEL NSA325 booting problem (2 replies)
I have a serial cable and trying to boot from USB because of impossible to boot from NAND after flashed uboot.2016.05-tld-1.nsa325.bodhi.tar USB was formatted as ext4 with boot flag and rootfs label,...
View ArticleUnderstanding U-Boot Source (1 reply)
I have the U-Boot 1.1.4 source source code for the Cisco ON-100. The documentation says to run the following commands: make mrproper make db88f6282bp_config NBOOT=1 DDR=3 FREQ=400 make I am assuming...
View ArticleZyxel NSA320s restore - mtd1 needed (1 reply)
Hello everyone, I am looking for a way to recreate mtd1 (populate it with stock env values). I have a dump of original envs: /tmp # ./fw_printenv bootargs=console=ttyS0,115200...
View ArticleNetgear Stora success (no replies)
Not sure whether anyone has reported success with a Netgear Stora yet, but I can confirm that all works great! I had a Netgear Stora that was hanging with a corrupted U-Boot 1.1.4. I was unable to...
View ArticleKirkwood U-Boot and Debian Installer Script (WIP) (4 replies)
This is the working thread for the script to install latest U-Boot and Debian rootfs for Kirkwood boxes.
View Articlehttp://dumps101.us SELL DUMPS PIN/TRACK 1/2 /BALANCE HIGH/DUMPS ALL COUNTRY...
http://dumps101.us SELL DUMPS PIN/TRACK 1/2 /BALANCE HIGH/DUMPS ALL COUNTRY VERY GOOD Sell Dumps Pin/ Track 1&2 Shop/ Dumps Pin All Country/ Dumps Balance Good/ Dumps free/ Best Dumps...
View ArticleTroubleshooting uboot env (3 replies)
Hello all, Based on the discussion Debian on NSA310S, I'm in the process of booting Debian from hard drive. I have modified the instructions by Pengu to dual boot from sata and nand. My Zyxel NSA310s...
View Article[solved] Troubleshoot booting Zyxel NSA310s (netconsole) (no replies)
UPDATE 1: The device boots with success from a 2TB mbr disk. UPDATE 2: After recreating the GPT table on the 3TB, it appears that my problems are solved. (I had mucked with the old GPT, hoping that...
View ArticleDLink DNS-325 u-boot image (1 reply)
Hi, Stupidly bricked my DNS-325 :( Could you please share mtd0 image with original u-boot from any Dlink DNS-325? (mine is RevA1) E.g. by running this: nanddump -f /tmp/mtd0-dump.bin /dev/mtd0 Than...
View ArticleGlobalScale Dreamplug (no replies)
Anyone have a clue how to gain serial access to this without purchasing GlobalScale's expensive UART/JTAG module? The pin-out to the UART might be enough. Ray
View ArticleBroke my E02 updating "2016.05 U-Boot Kirkwood - PogoE02" (15 replies)
I had a Debian dist-upgrade today that broke my front light by naming them back to shivaplug. The upgrade upgraded me to 3.16 I believe. I did the debian:~# echo "default-on" >...
View ArticleStuck at "ALERT! /dev/disk/by-label/rootfs does not exist. Dropping to a...
Hello! I have been reading dozens of sites in this great forum for weeks now, for preparing the conversion of my GoFlex Net into something useful (newest UBoot + latest possible Debian) as good as...
View Articlehow to backup/restore your NAND patitions and full device (5 replies)
Hello! I could use an easy to follow guide, on how I could clone one GoFlexNet onto another GoFlexNet. It should cover all possible data responsible for the characteristics of the device, so that's...
View ArticleConvert Pogoplug Series 4 to Debian, howto? (1 reply)
Hi! Currently running a couple of pogo plugs (one standard with SATA, one mobile) on Archlinux (https://archlinuxarm.org/platforms/armv5/pogoplug-series-4). Now wanting to re-purpose these, and Debian...
View ArticleNC appears successful, but no ip / ssh (goflex) (2 replies)
I've had "U-Boot 2016.05-1 (Jun 20 2016 - 01:58:53 -0600) Arch Linux ARM" running on my GoFlex Home for a while, but I would like to leave that working on the sata as it does now, but run Debian from...
View ArticleNetgear Stora uboot envs and FDT (3 replies)
I loaded uboot.2016.05-tld-1.netgear_ms2110.bodhi.tar It works well. I wanted to see if I could use FDT. I can't think of any reason why it would not work. My question is about using the...
View ArticleuBoot for netgear Stora FDT (2 replies)
Bodhi, I went ahead and tried FDT on my netgear stora. I updated uboot to uboot.2016.05-tld-1.netgear_ms2110.bodhi.tar I also rewrote the envs following your instructions With a USB stick formated to...
View ArticleHelp with Pogoplug E02 Restore / Repair - Have Serial Access (1 reply)
I picked up a Pogoplug a while back and had messed with it a little before putting it on the shelf. Plugged it back in recently to try and use it for a little home server and proceeded to bork it up...
View Article