DLink DNS-325 u-boot image (1 reply)

Hi,

Stupidly bricked my DNS-325 :(
Could you please share mtd0 image with original u-boot from any Dlink DNS-325? (mine is RevA1)

E.g. by running this: nanddump -f /tmp/mtd0-dump.bin /dev/mtd0
Than grab off /tmp/mtd0-dump.bin file from the device.

Thank you in advance!

P.S.
Tried pulling out and compiling u-boot but it always hangs "Uncompressing Linux....... done"
Nothing happens afterwards.
Restored original environment but still no luck ((
Tried DNS-320 u-boot but it worked only via UART booting (kwboot). When it's flashed, device doesn't boot at all.