pogoplug PRO P01. dual wireless N radios? suggestions! (no replies)
This is my second pogoplug purchase. was delivered last night, first thing I did was take the thing appart and connect a sata cord and drilled a hole for easy access to the cord. I purchased a 8gig...
View ArticleNSA325 NAND flash gone wrong - kwboot a kwb file OK! (4 replies)
I've done something wrong with NAND flashing latest Arch Linux U-Boot in stock env on a NSA325v2. Now the box isn't self-booting / self-hosting anymore. But with kwboot and a decent U-Boot kwb file...
View Articlenetboot from pogoplug E02? (2 replies)
Is it possible to boot a Pogoplug E02 using netboot? I would like to keep the rootfs on a network drive as it would playing with it much easier. Is this possible? Thanks, Rainer
View ArticleNetconsole stopped working (4 replies)
Hi Bodhi, It seems after I updated new u-boot 2015.10 the netconsole stopped working. It seems dockstar can not ping to my serverip. but I can use my another computer to ping the serverip. I tried to...
View ArticleFrom 88F6281 to 88F6702 (1 reply)
Hi all, I am trying to run Linux 2.6.32 built for a 88F6281 on a 88F6702 (provided with Linux 2.6.31). Both are from the same Kirkwood ARMv5TE family as you can notice by reading the page 10 of the...
View ArticleNSA310 with uboot.2015.10-tld-1 HD detection (4 replies)
Hi bodhi! Thanks for your great work! I finally took the plunge and flashed the uboot.2015.10-tld-1 on my NSA310. I hade a couple of bad blocks on 00040000 00060000 but I did some reading and decided...
View ArticleRestore original u-boot on Pogoplug-E02 that has Doozan chained mtd3 u-boot...
Hi folks I have a Pogoplug-E03 here that I used to run Debian on from a USB HDD. At the time I followed Jeff's guide to install a chainloaded newer U-boot on mtd3. The Pogoplug has been sitting unused...
View ArticleEnabling ECC ram: possible? (3 replies)
I was wondering about the possibility to enable ECC for the RAM. The SoC supports it, and afaik the only difference in PC DIMMs is that they add a chip to compensate for the RAM space used by...
View Articlebad block on mtd (3 replies)
hi bhodi, in your install instructions you write: >4. Be sure there is no bad block in the first 2M of your NAND (check dmesg for bad block 0 to 16). This is very important, if >there is bad...
View Articleno .dtb file (4 replies)
Hello Bodhi, Is it possible to boot using ONLY uImage kernel file without its .dtb file? If so, can you help me to modify the following uEnv.txt file so that it won't need the...
View ArticlePogoplug PRO Bootloader no start with flash disk (5 replies)
Hi I`m install debian in Pogoplug Pro from this instruction http://blog.qnology.com/2015/04/hacking-pogoplug-v3oxnas-proclassic.html?showComment=1464198116974#c7190902143829429000 . - I untar debian...
View Article[request] making bad blocks less bad - starting U-Boot from another NAND...
I've read that some guys have bad blocks (0 - 1024 kb) and there is no place for flashing U-Boot in typical size (512 kb - 1 mb). is it possible to "jump" to another working NAND position and start...
View ArticleSATA booting on Kirkwood boxes? (4 replies)
bodhi Wrote: ------------------------------------------------------- > This is WarheadsSE's instruction (the original) > (using Arch): >...
View ArticleNSA-325 Bricked HDD2 LED constantly active (3 replies)
I have a bricked NSA-325. I tried to uartboot it with kwboot without success: ubuntu@ubuntu:~/Desktop/kwboot-tool$ sudo ./kwboot -b uboot.2015.10-tld-1.nsa325.mtd0.kwb -t -B 115200 /dev/ttyUSB0 -p...
View ArticleBoot from GPT formated disk? (8 replies)
Hi I installed the new uboot on my GoFlex net and would like to boot from a USB hdd which is GPT and not MBR formated. In addition, the rootfs labeled partition is partition 5. How can I boot from...
View ArticleOpenWrt u-boot with Read-Only mtd0? (2 replies)
Results: root@debian:~# fw_printenv | grep -i dtb root@debian:~# fw_printenv bootcmd bootcmd=run bootcmd_uenv; run bootcmd_usb; run bootcmd_nand; reset root@debian:~# fw_printenv mtdparts...
View ArticleRecovery Help on Dockstar (1 reply)
It seems I've done something incorrectly in updating my Dockstar. I was trying to upgrade to the most current u-boot and rootfs, but it fails to boot. Though I've read through a lot of helpful content...
View ArticlePogoplug E01 u-boot question (2 replies)
I just acquired a Pogoplug E01 the original Cloud Engines plug. The internal board is manufactured by GlobalScale Technologies and indicates a REV3.0 It is a 1.2Ghz 88F6281 with 512MB Hynix NAND and...
View ArticleDockstar kernel booting problem (11 replies)
Hi Bodhi, after updating to new Uboot 2015.10 (which worked very well btw.), I updated my USB-Stick to Devuan Jessie with Kernel 4.6, which seems to run pretty smooth. The only problem is: the rescue...
View Articleiomega ix4-200d not execute post bios (no replies)
Hi all, my storage, during debian installation doesn't execute post bios. Please see the photo Iomega ix4-200d not execute post bios I've tried to connect via serial console with JTAG PL2303, but the...
View Article
