Hi,
Please help.
After install new uboot (2014.07) and rootfs my Goflex net "bricked".
With Serial Jtag I see I have bad blocks on flash.
I realized it during uboot install, but because my nandwrite not reported errors, I disregard it.
Serial consol shows this:
[ 21.935908] Scanning device for bad blocks
[ 22.103884] Bad eraseblock 1534 at 0x00000bfc0000
My problem is not able to boot Goflex net from USB or SATA.
I attached serial console log.
And copy here too:
Thanks for any help.
Robert
Please help.
After install new uboot (2014.07) and rootfs my Goflex net "bricked".
With Serial Jtag I see I have bad blocks on flash.
I realized it during uboot install, but because my nandwrite not reported errors, I disregard it.
Serial consol shows this:
[ 21.935908] Scanning device for bad blocks
[ 22.103884] Bad eraseblock 1534 at 0x00000bfc0000
My problem is not able to boot Goflex net from USB or SATA.
I attached serial console log.
And copy here too:
Thanks for any help.
Robert
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:35:50)
Seagate GoFlex Net
SoC: Kirkwood 88F6281_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1116 Initialized on egiga0
No link on egiga0
ping failed; host 192.168.178.26 is not alive
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
2756040 bytes read in 477 ms (5.5 MiB/s)
6032465 bytes read in 592 ms (9.7 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.16.0-kirkwood-tld-2
Created: 2014-09-01 23:18:31 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2755976 Bytes = 2.6 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-3.16.0-kirkwood-tld-2
Created: 2014-09-01 23:18:48 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6032401 Bytes = 5.8 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-kirkwood-tld-2 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #2 PREEMPT Sun Aug 31 18:56:01 PDT 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Seagate GoFlex Net
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 115744K/131072K available (5441K kernel code, 397K rwdata, 1840K rodata, 257K init, 299K bss, 15328K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07248b0 (7283 kB)
[ 0.000000] .init : 0xc0725000 - 0xc0765444 ( 258 kB)
[ 0.000000] .data : 0xc0766000 - 0xc07c975c ( 398 kB)
[ 0.000000] .bss : 0xc07c975c - 0xc08144dc ( 300 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000011] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 20.493464] Console: colour dummy device 80x30
[ 20.493492] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 20.583246] pid_max: default: 32768 minimum: 301
[ 20.583363] Security Framework initialized
[ 20.583430] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.583449] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.584320] Initializing cgroup subsys devices
[ 20.584383] Initializing cgroup subsys freezer
[ 20.584412] Initializing cgroup subsys net_cls
[ 20.584459] Initializing cgroup subsys blkio
[ 20.584557] CPU: Testing write buffer coherency: ok
[ 20.585027] Setting up static identity map for 0x5273f0 - 0x527448
[ 20.587399] devtmpfs: initialized
[ 20.591378] prandom: seed boundary self test passed
[ 20.595443] prandom: 100 self tests passed
[ 20.595474] pinctrl core: initialized pinctrl subsystem
[ 20.595987] regulator-dummy: no parameters
[ 20.596461] NET: Registered protocol family 16
[ 20.596916] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 20.598166] cpuidle: using governor ladder
[ 20.598194] cpuidle: using governor menu
[ 20.598334] Kirkwood: MV88F6281-A1, TCLK=200000000.
[ 20.598358] Feroceon L2: Enabling L2
[ 20.598397] Feroceon L2: Cache support initialised.
[ 20.634770] vgaarb: loaded
[ 20.635126] usbcore: registered new interface driver usbfs
[ 20.635203] usbcore: registered new interface driver hub
[ 20.635328] usbcore: registered new device driver usb
[ 20.636324] Switched to clocksource orion_clocksource
[ 20.675100] NET: Registered protocol family 2
[ 20.676090] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.676115] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.676135] TCP: Hash tables configured (established 1024 bind 1024)
[ 20.676206] TCP: reno registered
[ 20.676219] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 20.676241] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 20.676505] NET: Registered protocol family 1
[ 20.676843] RPC: Registered named UNIX socket transport module.
[ 20.676855] RPC: Registered udp transport module.
[ 20.676862] RPC: Registered tcp transport module.
[ 20.676870] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.677181] Unpacking initramfs...
[ 21.179454] Freeing initrd memory: 5884K (c1101000 - c16c0000)
[ 21.179593] NetWinder Floating Point Emulator V0.97 (double precision)
[ 21.180756] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 21.180825] audit: initializing netlink subsys (disabled)
[ 21.180880] audit: type=2000 audit(0.680:1): initialized
[ 21.181700] zbud: loaded
[ 21.181972] VFS: Disk quotas dquot_6.5.2
[ 21.182023] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.182586] NFS: Registering the id_resolver key type
[ 21.182645] Key type id_resolver registered
[ 21.182655] Key type id_legacy registered
[ 21.182681] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 21.182696] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.182867] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 21.183178] msgmni has been set to 237
[ 21.183331] Key type big_key registered
[ 21.185686] alg: No test for stdrng (krng)
[ 21.185805] bounce: pool size: 64 pages
[ 21.185872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 21.185891] io scheduler noop registered
[ 21.185906] io scheduler deadline registered
[ 21.186076] io scheduler cfq registered (default)
[ 21.186592] mv_xor mv_xor.0: Marvell shared XOR driver
[ 21.226404] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 21.266391] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 21.266567] mv_xor mv_xor.1: Marvell shared XOR driver
[ 21.306390] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 21.346388] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 21.346820] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 21.347824] console [ttyS0] disabled
[ 21.367924] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 21.915194] console [ttyS0] enabled
[ 21.920126] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 21.926537] nand: Micron MT29F2G08AAD
[ 21.930215] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 21.935908] Scanning device for bad blocks
[ 22.103884] Bad eraseblock 1534 at 0x00000bfc0000
[ 22.163412] 4 cmdlinepart partitions found on MTD device orion_nand
[ 22.169726] Creating 4 MTD partitions on "orion_nand":
[ 22.174894] 0x000000000000-0x000000100000 : "u-boot"
[ 22.180291] 0x000000100000-0x000000500000 : "uImage"
[ 22.185644] 0x000000500000-0x000002500000 : "rootfs"
[ 22.191025] 0x000002500000-0x000010000000 : "data"
[ 22.197176] libphy: Fixed MDIO Bus: probed
[ 22.213951] libphy: orion_mdio_bus: probed
[ 22.218240] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 23.297450] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:26:65:ae
[ 23.306443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.313001] ehci-pci: EHCI PCI platform driver
[ 23.317547] ehci-orion: EHCI orion driver
[ 23.321653] orion-ehci orion-ehci.0: EHCI Host Controller
[ 23.327127] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 23.334852] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 23.356362] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 23.362498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 23.369344] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.376619] usb usb1: Product: EHCI Host Controller
[ 23.381520] usb usb1: Manufacturer: Linux 3.16.0-kirkwood-tld-2 ehci_hcd
[ 23.388267] usb usb1: SerialNumber: orion-ehci.0
[ 23.393650] hub 1-0:1.0: USB hub found
[ 23.397499] hub 1-0:1.0: 1 port detected
[ 23.402311] mousedev: PS/2 mouse device common for all mice
[ 23.716383] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 23.944114] usb 1-1: New USB device found, idVendor=058f, idProduct=6387
[ 23.950874] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 23.958070] usb 1-1: Product: Mass Storage
[ 23.962184] usb 1-1: Manufacturer: Generic
[ 23.966299] usb 1-1: SerialNumber: 065414A6
[ 24.416355] rtc-mv rtc-mv: internal RTC not ticking
[ 24.421447] i2c /dev entries driver
[ 24.426765] hidraw: raw HID events driver (C) Jiri Kosina
[ 24.432547] drop_monitor: Initializing network drop monitor service
[ 24.439106] TCP: cubic registered
[ 24.442447] NET: Registered protocol family 17
[ 24.447080] Key type dns_resolver registered
[ 24.452105] registered taskstats version 1
[ 24.457253] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 24.465431] Freeing unused kernel memory: 256K (c0725000 - c0765000)
Loading, please wait...
[ 24.547301] udevd[55]: starting version 175
[ 24.722850] SCSI subsystem initialized
[ 24.768293] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 24.784262] sata_mv sata_mv.0: cannot get optional clkdev
[ 24.816169] scsi0 : usb-storage 1-1:1.0
[ 24.820268] sata_mv sata_mv.0: slots 32 ports 2
[ 24.836109] usbcore: registered new interface driver usb-storage
[ 24.860866] scsi1 : sata_mv
[ 24.867852] usbcore: registered new interface driver uas
[ 24.882622] scsi2 : sata_mv
[ 24.885778] ata1: SATA max UDMA/133 irq 21
[ 24.911416] ata2: SATA max UDMA/133 irq 21
[ 25.256374] ata1: SATA link down (SStatus 0 SControl F300)
[ 25.626888] ata2: SATA link down (SStatus 0 SControl F300)
[ 25.828598] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 25.868684] sd 0:0:0:0: [sda] 7989248 512-byte logical blocks: (4.09 GB/3.80 GiB)
[ 25.876773] sd 0:0:0:0: [sda] Write Protect is off
[ 25.882017] sd 0:0:0:0: [sda] No Caching mode page found
[ 25.887407] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 25.937149] sda: sda1
[ 25.942398] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 25.959586] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
mount: mounting /dev/sda1 on /root failed: Invalid argument
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
done.
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
modprobe: module i8042 not found in modules.dep
[ 35.845694] uhci_hcd: USB Universal Host Controller Interface driver
[ 35.860027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 35.874891] usbcore: registered new interface driver usbhid
[ 35.880626] usbhid: USB HID core driver