ls, cat, vi (2 replies)
I'm trying to get a better idea about the way uBoot works and have yet to figure out how the filesystem works. Hopefully some can give me some guidance.... For instance, how can I see what devices or...
View Articleext4 booting problems Debian Stretch ( metadata_csum ) (no replies)
I just setup a GFN boot onto rootfs RAID on Debian Stretch (which requires a seperate /boot partition for initramfs, kernel and device tree nonsense). uBoot reported that it couldn't find the .dtb...
View ArticleZyXEL NSA325 booting problem with 2016.05 U-Boot Kirkwood (4 replies)
Dear bodhi, can you take a minute and look at my printenv. Since few days I am trying to boot my NSA325 (Debian 4.4.0 (Jessie) , Kernel 4.12.1 , latest u-boot) from hdd-sata instead USB but It didnt...
View ArticleUnbricking Pogoplug E02 using Jtag. Help with pinout? (no replies)
In a desperate attempt to revert to original factory Pogoplug firmware, I flashed the "original" mtd0, mtd1, etc files provided from a user on this forum. (Newbie maneuver, I know.) I don't recall...
View Articleuboot doesn't pass bootargs to kernel (1 reply)
Hi, I'm fighting half of the day and slowly giving up. Nsa320 with latest debian and kernel on usb stick and latest uboot with default settings (env default -a). When booting I get an error: [...
View ArticleTrying to restore to Original Firmware Pogoplug E02 (no replies)
Some years ago I replaced the original firmware of 1 of the pogoplugs. I used the usb stick for something else and that resulted in a non booting Pogoplug. During the years this kept bugging me, so...
View Articleaccidently delete mtd0 0 5 (4 replies)
While install u-boot, I accidently erase /dev/mtd0 0 5. Then I installed u-boot that fill /dev/mtd0 0 4 I guess, but I dont know what to do with 5. Help Please.
View ArticleYet another bricked DockStar (2 replies)
Hi, I don't know how, but I have bricked my DockStar when trying to update uBoot. I have tried to unbrick it using JTAG port. First using my RaspBerry Pi, unsuccessfully, then buying a Bus Pirate....
View ArticlePogoplug v4 Mobile uboot issue. (17 replies)
Prior to flashing I entered ethaddr: fw_printenv ethaddr Warning: Bad CRC, using default environment. ## Error: "ethaddr" not defined I ignored it since I'd be flashing the envs anyway per the...
View ArticleAssistance requested booting PogoOS (13 replies)
After using my pogoplug v4 mobile mofified with optware as per instructions in Qui's blog, I decided to install the Debian linux. Since download.qnology.com is down, I used the script at...
View ArticleBooting Pogo V3 Debian rootfs from OpenWrt u-boot (30 replies)
bodhi Wrote: ------------------------------------------------------- > ming, > > hahibie has a good point, if the uboot envs are c > urrently set up to boot Openwrt, you need to modif >...
View ArticlePogoplug Mobile no light/ssh/serial connection (10 replies)
Hi, I am new here so I hope I'm posting this in the correct place. I have a pogoplug Mobile that I was experimenting with. I started by following this tutorial...
View ArticleNetgear Stora: EHCI timed out on TD when loading uInitrd (3 replies)
Hi bodhi, I have successfully installed the latest u-boot on my Netgear Stora, and have sucessfully booted debian 8 wheezy from a 2GB industrial grade USB stick from HGST. Thanks a lot for your effort...
View ArticleGoFlexHome not booting (24 replies)
I have only just discovered this forum, so apologies if I'm posting in the wrong place... I have been using a Seagate GoFlex Home unit for several years and had read that it was possible to install...
View ArticleNeed old uboot for Pogo E02 (1 reply)
I have an old pogoplug that I want to turn into a server. However if I do the "wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh" command, it can not find the file.
View ArticleIssues with pogoplug E02 boot since Uboot update (3 replies)
Thank you in advance to this forum, you're some of the most informative folks I've ever seen! I updated my E02 pogoplug's uboot a few months ago, because I wanted GPT support. However, after this, the...
View Article[OXNAS]uImage sans DTB file (11 replies)
I noticed OpenWRT/LEDE stops providing .dtb file. So, how do I craft uEnv.txt to adopt the missing .dtb file?
View ArticleCurrent 2016.05 Uboot - which filesystems ? (4 replies)
Probably more a question for @bodhi than anyone, but any advise welcomed :) My question is what file systems can the current 2016.05 Uboot boot ? ext2 / ext3 - I know from my own experience work fine,...
View ArticleHelp unbricking IOmega ix4-200d (26 replies)
Help! I have two IX4-200D NAS boxes that are currently useless. The original hard dives are gone and have been replaced with larger 4 TB Seagate NAS Hard drives. I'm fairly new to this and was hoping...
View Articleu-boot via uart on mvebu (7 replies)
Does anyone know the logistics to boot an mvebu device via uart? In the GPL source code from Western Digital for the EX2100, building u-boot generates the following files:...
View Article
