Debian uImage (11 replies)
I hope this is the right forum to ask the following. If not, please kindly move it to a more appropriate forum. I finally managed to install debian wheezy rootfs on my Seagate GoFLEX Home device....
View ArticleE02 bricked - how to rescue (9 replies)
Greetings all. Although there is a wealth of information available in these pages I am stuck and need some help. I have a Pogoplug E02 which I purchased cheaply off Ebay knowing it was bricked as the...
View ArticleNo USB Boot / Getting Kernel Messages in NC (3 replies)
Well, I can say I've learned a lot about installing Debian on a Pogoplug series 4 over the past couple of days. However, I'm at a point that I can't get it to boot from Debian on a USB and can't...
View ArticleHow do i recover from this....... (6 replies)
I will be using this to build an image for a user on here..... Good News / Bad News time Good News I can serial console to the unit and extract the settings listed below. it appears to be running the...
View ArticleProblems with Understanding Drive Order (6 replies)
Okay, so I was setting up a new Pink E02 and had everything working great... and then I plugged in a hard disk and the USB drive order changed. Boom, my boot disk became sdb1 and wouldn't boot. I...
View ArticlePogoplug V3 (Pro and Classic) - Sample u-boot Env's for uEnv.txt (2 replies)
******!!!!CURRENTLY BETA AND FOR SINGLE DEVICE ATTACHED BOOTING ONLY!!!!!******** With the release of the latest bodhi u-boot for Oxnas (uboot.2013.10-tld-4 u-Boot), those of us with Oxnas powered...
View ArticleNSA 325 Bricked (3 replies)
I think I did it. My NSA 325 is bricked. I followed these instructions, where I did the MTD0 flash using the stock NSA 325 firmware, and I also did rewrite the environment to 0xc0000....
View ArticlePossible to write nc output on pogoplug into logfile? (no replies)
Hi is it possible to write the boot output (the one send via nc, or even more detailed) to a local logfile on an attached USB Flash Drive (or on the pogoplug itself)? This would make debugging during...
View ArticleRestoring Uboot Environment from a Text file (1 reply)
Recently updated one of my Dockstars with the latest uBoot (2014.07) and also flash the new uBoot environment image. Now I can't boot into the Jeff's rescue system that is installed in flash. I do...
View ArticlePogoplug E02 - can not activate ssh - what can I do? (5 replies)
Hi I bought a pogo plug on eBay which boots, is available in the network, I can ping it, and it is activated with pogo plug - but I can't activate ssh as it is not seen by the [pogoplug website. Is...
View ArticleOpenWRT on Pogoplug Pro / V3 - Need Help Making U-boot Work (2 replies)
Anybody daring out there can you figure out how to get OpenWRT and a stable u-boot working on the Pro / V3 ? See my contribution here: https://forum.openwrt.org/viewtopic.php?pid=270503#p270503 You...
View ArticleUSB port not recognizing any device (5 replies)
Hi again Bodhi, i come now with a new challenge :D after all our surgery to my PPv4, everything seems to go normal now, i managed to install Optware/samba and it works perfect, however, for an unknown...
View ArticleHelp - Why no serial console output after "Starting kernel..."? (1 reply)
I need another set of eyes to help me figure out what's going on here. Why can't I see the kernel bootup process. Looks like my bootargs is set correctly, but obviously it isn't. U-Boot 2013.10-tld-4...
View ArticlePogo mobile nand bad block - installation failure (10 replies)
hello, i am new to Linux but did read many topics in this forum and others. after activating my new pogoplug mobile (v4-A1), i tried to install archlinux on it, using the instructions on ArchLinux...
View ArticleJTAG woes (3 replies)
Hello So in the midst of procrastinating, I decided that my Dockstar's u-boot desperately needed upgrading. Of course. I downloaded the latest one from this forum and attempted to flash it from uboot...
View ArticleHelp after upgrading Archlinux Kernel and Pacman -Syu (2 replies)
Bodhi, [Let me preface by saying I know you're not an Archlinux fan] You're the only person I know that can probably either explain what happened and/or help me. Pogoplug E02, upgraded the kernel from...
View Article-bash: ./kwboot: cannot execute binary file (3 replies)
I'm trying to recover a Pogoplug V4 using another Pogoplug V4, but can't seem to get kwboot to run. What am I missing? root@spike:/# mkdir /kwboot root@spike:/# cd /kwboot root@spike:/kwboot# wget...
View ArticleHelp goflexnet (3 replies)
I'm getting crazy U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:58:11) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial...
View ArticleOpenWRT for PogoPlug Pro rootfs tar (44 replies)
I just built OpenWRT for PogoPlug Pro (openwrt-oxnas-bin.tar.xz -- 73.7 MB in size). It contains just basic rootfs + Linux kernels in /boot directory. Just download and untar to extract. I have not...
View Article[Firmware utilities ompatibility] OXNAS vs. Marvel Kirkwood (4 replies)
I was perusing this Hacking the Pogoplug v3/Oxnas (Pro/Classic) with Debian blog and noticed the download firmware utilities links reference to http://download.qnology.com/pogoplug/v4. AFAIK, PogoPlug...
View Article