Still having trouble with a new uboot install (9 replies)
Following a prior difficulty and reflashing back to factory, I have managed to mess up my GoFlex Home again. This is the sequence of events: Mess up the gfh while installing uboot. booted from usb...
View ArticleDoes any version of uboot support EFI and GPT? (19 replies)
I ask because I have a 3TB GoFlex home. I would like to install linux directly on the drive and boot from it. I am looking for the best solution to this. I am aware that there is a solution that uses...
View Articleinterchange SD cards between 2 pogopiugs (2 replies)
Hi Jeff. First, thanks for all of this, from all of us. I have installed uboot on a second pogoplug (the first was ping and the second black, but identical memory and debian linux) The pink one has an...
View Articleunsupported machine ID 0x00000bb6 (=2998) (2 replies)
Hi, I tried to create a wheezy USB stick on my 'old' squeeze dockstar. Now I can only boot into pogo - w/o really knowing why. 1) started the wheezy installation which updated the uboot 2) failed to...
View ArticleGoflex Satellite (no replies)
Has anyone worked with the goflex satellite? Runs on an OMAP with u-boot running Arago project as a base. Processor : ARMv7 Processor rev 2 (v7l) BogoMIPS : 298.32 Features : swp half thumb fastmult...
View ArticleTrashed uboot environment vars (2 replies)
Hi guys, I've just managed to delete all of my uboot environment variables with a careless reboot. I still have uboot installed, but I cannot natively boot from ANYTHING. I just get dumped to a...
View ArticleVerification Failed during uboot installation (1 reply)
Hi, I bought an Pogoplug a week ago. While using the manual from http://projects.doozan.com/uboot/ I got the Error: (after typing "./installing_uboot_mtd0.sh"): # checking for /usr/sbin/nandwrite... #...
View ArticleSerial cable difficulties with Pogoplug V3 oxnas (no replies)
What is the cause and cure for gibberish over the serial connection? Pogoplug V3 Basic oxnas no Uboot or kernel changes from the original. TJ
View ArticleProblems with POGO-E02 (Black) (25 replies)
Hi there, I have an POGO-E02 (Black) and wanted to install ArchLinux on it. Hardware-Infos to the device: Pogoplug:/tmp$ cat /proc/cpuinfo Processor : ARM926EJ-S rev 1 (v5l) BogoMIPS : 1192.75...
View ArticleGRUB on U-Boot! (no replies)
Seems Linaro has been busy! They have implemented "GRUB on U-Boot" support: https://wiki.linaro.org/LEG/Engineering/Kernel/GRUB This could be very handy for embedded devices, and could help to...
View ArticleWho has had success with 3TB GFH? [Solved] (2 replies)
I have solved my problems below. The short answer is that I was not using an appropriate kernel. I updated and now all is well. My setup is described below: my uboot:...
View ArticleTeamspeak 3 Server (no replies)
Hello guys, is it possible, to run a Teamspeak 3 Server on Pogoplug Pro with Debian on? Please let me know. Thanks for your help.
View ArticleuBoot on Pogoplug Pro: “Unknown uBoot detected on mtd0” (4 replies)
Hi, I’m new to ARM/Linux Device hacking. After a bit of digging around on various websites I found that it would be wonderful to have Debian GNU/Linux on my Pogoplug Pro (that’s what it says on the...
View Articleu-boot for Zyxwl nsa320 (7 replies)
I am struggling with my nsa320 using the stock u-boot. In addition to it not supporting thumb drives, the network is very flaky, but only in u-boot. Sometimes it works and sometimes it doesn't. When...
View ArticleSwap boot disks with between two dock (1 reply)
Hello Forgive me if it's not the right place to post, I'am a newbie with this subject, I just presume it's the appropriate forum.. I own two docks, on each I attached an USB disk, and I installed...
View ArticleDockstar - now way to boot (1 reply)
Hi all, I have a dockstar on which I installed a couple of years ago Debian Squeeze. Yesterday I tried to do a dist-upgrade. Something went wrong. No way to reboot via usb key. I can boot using v3...
View ArticleI was wrong: installed uboot on B04 (1 reply)
Hi, I used the command --force, but my pogo is pro and not pink v2, so i have now a bricked pogoplug . I bought the cable C-42, so I have a serial connection. Befor installing, i made backups with #...
View ArticleuBoot install canceled with Pogo E02(Black) (10 replies)
Hello I have a Pogoplug E02Black) I want to install Debian uboot on my Pogoplug E02(Black). but I can't install on my device Can you help me to solve my problem? My pogo's nand flash has a 1 bad...
View ArticleGoflex Net fail -need help to unbrick (4 replies)
Hello, i have an almost new Goflex Net device, that i wanted to run debian. After trying different solutions (installing debian and rescue), i have problem with my device. I cannot install a new...
View ArticlePogoplug E02 completely dead - no ssh, www and serial (2 replies)
Hi there I have got a Pogoplug which is completetly dead - cant get access to it? I think the only solution would be to recover via jtag? Since pogoplugged.com is dead there is not much information...
View Article