Hi,
some time ago I experimented with u-boot env settings and reflashing and i ended up with bricked NAS. Since my last write command and reboot there is no output on console, just black screen. I triple check cables and even tried on different Q700 and USB/UART is working.
CPU in NAS is Marvell 88F6281 and referring to Feature Specs it should have UART boot option. But it is not working. File transfer newer starts. I already tried kwboot and manual XMODEM send in picocom. Nothing ever worked. I intend to solder of NAND (there is 25P28V6P) and reflash with backup I made earlier. So until I'll try this last resort option I want to know it has a chance tu success.
Could anyone clarify if it is totally bricked or kwboot should work for me even if there is no output on console?
Thank you for your help.
Patrik
some time ago I experimented with u-boot env settings and reflashing and i ended up with bricked NAS. Since my last write command and reboot there is no output on console, just black screen. I triple check cables and even tried on different Q700 and USB/UART is working.
CPU in NAS is Marvell 88F6281 and referring to Feature Specs it should have UART boot option. But it is not working. File transfer newer starts. I already tried kwboot and manual XMODEM send in picocom. Nothing ever worked. I intend to solder of NAND (there is 25P28V6P) and reflash with backup I made earlier. So until I'll try this last resort option I want to know it has a chance tu success.
Could anyone clarify if it is totally bricked or kwboot should work for me even if there is no output on console?
Thank you for your help.
Patrik
