Serial connection settings for NSA 325 (1 reply)
Hello, some days ago my NSA 325 v2 stopped working and i do not know why; switched off and turned on again but it did not came online. I suspect a fault in the usb drive with debian installed on it....
View ArticleV4 Green LED settings (1 reply)
Hello. I had originally installed Arch uboot in a few of my Pogo V4s. Now that I'm installing the doozan uboot to my next batch of V4s (and looking forward to the newest release with rear USBv3...
View ArticleNSA 325v2 boot failure (1 reply)
Suddenly my NSA 325v2 with uboot and debian stopped working: it was on but unresponsive, not even getting it's ip from dhcp. Turning it off and on again i get this error : [ 11.764587][ T7] scsi...
View Article2023.04 U-Boot Kirkwood - Pogo V4 (2 replies)
I'm writing the installation instruction for this board. In the meantime, you can try kwboot with the new u-boot. =========== This Pogo V4 u-boot has supports for USB 3.0. You can boot with the rootfs...
View ArticleTrying to fix RN104 (no replies)
Hi, Couple of months ago my RN104 failed to boot after a power failure. I didn't really know what happened, but after much googling I stumbled upon this forum which has been super cool. I picked up a...
View ArticleNetgear-Stora U-Boot 2017 cannot boot into Debian (1 reply)
So managed to install the new U-Boot following the tutorial but for sure I messed something up ! here is my boot nitializing devices... Reset IDE: Bus 0: OK Bus 1: OK Device 0: Model: WDC...
View ArticleWD My Cloud Gen 1 - MindSpeed Chip (2 replies)
@Bodhi, I understand that WD my Cloud Gen 1 is not supported As this is not a Kirkwood device. But could you please suggest what's the best alternative to install debian on this box? Recently my HDD...
View ArticleRequest - Origina uboot and uimage of EX2 Ultra (no replies)
Hi guys, does anyone have it? I can boot the exw2 ultra from usb, i need the original files to factory reset the os to the original one.
View Article2023.04 U-Boot Kirkwood - ZyXEL NSA325 (no replies)
In addition to the capabilties provided by u-boot 2017.07-tld-1 for NSA325 , this 2023.04-tld-1 NSA325 u-boot has the following new capabilties: - Supports for USB 3.0. You can now boot with the...
View Articlemounting /dev/sdb1 on /tmp/usb_stick failed: Invalid argument (6 replies)
I have a pink POGO-E02. I haven't used it except I tried to install Linux years ago. Now I want to try running "homeassistant" (HomeAssistant.io). Only port 22 is open and I finally guessed the root...
View ArticleDebian hangs on VFS can't find root on after flashing new U-boot onStora (1...
Hi Bodhi! Thanks for all your hard work on here, I could never have gotten this far without it. I have a Netgear Stora. I tried doing installations from a bunch of different USB flash drives, but...
View Articleunbrick NSA310 and set up environement (no replies)
Hi, From a wrong flashing process I was able to unbrick my NSA310 (with another Linux box, loading uboot.kwb via kwboot, UART module cable) I have the console of NSA310> and I am able to load the...
View ArticleZyxel NSA 325 v2 - *** ERROR: `serverip' not set - Cannot autoload with...
Hi everyone, first of all THANKS for your work ! I'm a owner of NSA 325 v2 (made by zyxel) and I'd really like to install on it a new OS (Debian on this case). I'm reading many post on the forum but...
View ArticleZyxel NSA325 V2 - error nandwrite (4 replies)
Hello, following this guide: https://forum.doozan.com/read.php?3,135222 loading the uboot in the NAS during nandwrite operation I receive the following error: /tmp # /root/tools/./flash_erase...
View ArticleDS411j with strange behavior, and no network (no replies)
Hi All, I have this unit that is behaving strangely. Short: it boots, it beeps as it shout but it does not work. Long: I have console access to the unit and can see that it loads kernel and gets to...
View ArticleDS411j uboot and kernel boot (2 replies)
now that the system has been testet and working ok with bodhi kernel(5.13.6-kirkwood-tld-1)and stock uboot(ancient) Im willing to try to use new uboot to make this box permanent auto-boot after...
View ArticleFw_setenv no longer available in u-boot-tools (3 replies)
Went to modify uInitrd load address for greater than 12M uInitrd for a E02 upgraded to the latest Kirkwood 6 kernel and discovered fw_setenv is no longer included in u-boot-tools and is therefor not...
View Article(WIP) 2023.04 U-Boot Kirkwood - Synology DS411j (and possibly 413j) (1 reply)
Initial version 19 Sept 2023 This is the work-in-progress version. Only run kwboot to test (it is not ready to flash to SPI yet). Download at Dropbox uboot.2023.04-tld-1.ds411j.bodhi.tar md5:...
View ArticleOld NSA310 resurrection (no replies)
Long story short: I installed openwrt on the nsa310 and it worked perfectly, then I wanted to install Debian. I bricked it, I managed to revive it, I made a USB stick following the tutorials here and...
View Article[How-To] boot with Kirkwood kernel files on USB and rootfs on HDD/SSD. (no...
How to boot with Kirkwood kernel files on USB and rootfs on HDD/SSD. This instruction is for the Kirkwood boxes that you have installed the supported Kirkwood u-boot that I've released here. For MVEBU...
View Article