Quantcast
Channel: Linux Device Hacking - uBoot
Browsing all 903 articles
Browse latest View live

PogoHole project (no replies)

Because I needed for different locations "pi-hole" like solutions, I decided to re-use 3 different versions of Pogoplug devices. I'm currently stuck on booting after (I think) successfully installing...

View Article


Trying to recover Pogoplug E02 from serial (no replies)

Hello all, I am hoping someone can help me . About a year ago I tried to flash the Popgoplug E02 to run Linux. i was able to SSH in via the backdoor method and thought things were going well....

View Article


Bricked Synology DS213 (Kirkwood) so close (7 replies)

Attempts to migrate from another unit to this one resulted in a boot loop. After accessing it through a serial connection I was happy to see that U-Boot came up and attempted to load which ends in a...

View Article

NSA 320 - is it bricked? (4 replies)

Hi, I've got problem with my zyxel nsa 320. I was using it few months ago with Debian, but disks broke down, and now i tried to back it to life, with new hdd. I turn it on with serial connected, but...

View Article

Possible to Install linux on MyCloud Home ? (4 replies)

Hello all, I have a Mycloud home that has unfortunately stopped working. I removed the attached hard drive to try to recover data with no luck. However once I had the Mycloud home apart I noticed that...

View Article


Pogo E02 - Wont boot to USB or Pogo OS (1 reply)

Working on a Pogo E02 now having got and V3 & V4 working. Upgraded UBOOT to latest version 2017007 as per instructions but now I can't boot to original Pogo OS or my Debian USB stick. This is the...

View Article

environment issues pogoplug pro v3 (no replies)

I am sure I am not the only one who occasionally goes too far and messes up my system to the point that the normal expected things just don't work so I will start with my current env issue and anyone...

View Article

POGO Plug v2 (E02) (1 reply)

I just received a used pogo e02, I wanted to to convert this to a slim player device by putting debian onto it. As far as I know it is fully stock os now. I have serial console to it now, but stock OS...

View Article


UBoot and Changing The Default OS (no replies)

Hi, I have a Pogoplug V4-A1-01 and I would like it's change the default OS to Debian and update my uBoot version. But I am not very literate in Linux, and I would like it if the steps used to resolve...

View Article


[SOLVED] No Netconsole on NSA325v2 (5 replies)

Hi everyone, Sorry, I posted this in the wrong section before! About a year ago, I flashed the latest U-Boot from this forum to my NSA325v2, and then made it boot Arch. Now, I wish to make some...

View Article

NSA320 revert to Stock software (U-Boot and OS) (no replies)

Hi all, I am trying to revert to stock OS a Zyxel NSA320 that I flashed with new U-Boot and Debian. Unfortunately I do not have any backup, but managed to flash it with an original U-Boot from a dump...

View Article

life-extension for Actiontec MI424RW Rev I router (no replies)

Looking all over for good info on the Actiontec MI424RW Rev I, and while there wasn't much love shown to this unit, I was hoping to use it as an AP or backup router. My home has a foil-faced sheathing...

View Article

Trying to revive a Netgear Stora MS2000 (7 replies)

Hi, So I have been trying to resurrect my old Netgear Stora MS2000 for a couple of nights now and can't really get it to work and I'm a little bit stuck on how to proceed, this is the log from my...

View Article


Pogoplug E04 not booting from SD Card or USB (4 replies)

I followed this link to be able to boot my old Pogoplug EO4 from either an SD card or USB: Qnology PogoPlug Booting from SD All appears to be OK except it always keeps booting into the Popoplug. When...

View Article

I done messed up! Lost uboot partition. (4 replies)

Well... I dusted-off my Goflex Home about a month ago. Got everything up and running via a USB drive. It is currently booted via USB running Debian. It didn't have enough RAM to run OMV very well, so...

View Article


Uboot install on PogoplugPro V3 question (1 reply)

Hello. I just picked up a Pogoplug Pro that is still stock. I'm wanting to set up the Bodhi uboot and rootfs. I'm following https://forum.doozan.com/read.php?3,16017 and it says /proc/mtd should look...

View Article

Pogoplug Series 4 V4-A03-01 PreInternet new uboot + dumb dumb = Kernel Panic...

Hello, I picked up a new old stock Pogoplug Series 4 (V4-A03-01) recently after coming across this hackaday article. I then watched the youtube uploads from Films by Kris. This then lead me to Kris's...

View Article


Need default /lib contents for Netgear Stora MS2110 (no replies)

Greetings. I have a 10-year-old Netgear Stora that I've been working to extend the useful life of recently. One of the things I've been attempting to do is update the firmware to hbs-5044, which is...

View Article

GoFlexHome, flashed u-Boot, but envs flash failed - now what? (4 replies)

Hello, first of all thanks for all the great input and learnings I got from this forum. It's fun playing around with these Kirkwood devices. Now to my question: I got a GoFlexHome for cheap and...

View Article

Netgear Stora install OpenWrt (5 replies)

Hi all! Maybe you can hrlp me. I try install OpenWrt on my Stora. Use insruction from wiki https://openwrt.org/inbox/toh/netgear/netgear_stora Use files from Energoblock in this topic...

View Article
Browsing all 903 articles
Browse latest View live


Latest Images