Below I copied the latest install for surfshark from their website this was not written by me but I did modify it for this forum, I copied it for those that don't feel comfortable accessing external links,I do not work for surfshark and I am a paid user of this product so be aware that if you use the product they will charge for service, I believe you can get a free version from some vpn providers as well. It does work well on my pogoplug v3 oxnas. also note if you are running noip to run your server you will want to get your server ip address.
I used the following:
Here is link: https://support.surfshark.com/hc/en-us/articles/360011051133-How-to-set-up-OpenVPN-using-Linux-Terminal
How to set up manual OpenVPN connection using Linux Terminal?
In this tutorial, you will learn how to set up an OpenVPN connection on your Linux device. This is an alternative way of connecting to Surfshark servers that will come in handy if the Surfshark VPN app can not be installed on your device or it does not perform as expected.
You will need a device running the Linux operating system and an active Surfshark subscription. If you don’t have the subscription yet, you can get it here.
Get your credentials
Install the OpenVPN package
Download configuration files
Connect to the VPN
This tutorial uses Ubuntu distribution. Please note that some configurations may vary depending on the Linux distribution you are using.
Get your credentials
You will need Surfshark service credentials to connect to the VPN using a manual OpenVPN connection. Do not confuse these with your regular credentials, namely your email address and your password.
Here is how you can get Surfshark service credentials:
Go to this page where all the details required for manual connection are stored.
You may need to log in before proceeding to this page. In that case, enter your email address and your password, then click Log in.
Click on the Credentials tab. You will find Surfshark service credentials there.
It is a good idea to keep this page open for now. You will need these credentials a bit later.
Install the OpenVPN package
Open the terminal window.
You can do that by pressing Ctrl+Alt+T keys or navigating to it in your apps menu.
Enter the following command to install all the necessary packages:
You may need to enter your computer password to confirm this process. In such a case, enter the password and press Enter.
Download configuration files
Navigate to the OpenVPN directory. You can do that by entering this command:
Download the Surfshark OpenVPN configuration by entering the following command:
Extract the configurations.zip by entering this command:
Enter the following command to see the list of all the available servers:
Connect to the VPN
Choose one server from the list that you want to connect to and copy the hostname (URL) representing this server's hostname.
Connect to your chosen server by entering this command:
For example, if you'd like to connect to the us-slc server, this would be the command:
Before you can be connected to the server, you should enter Surfshark service credentials.
Enter the credentials that you collected in the 'Get your credentials' part, and press enter.
If you can see the 'Initialization Sequence Completed' line in your terminal, you have successfully connected to Surfshark!
To disconnect from the OpenVPN connection, open the terminal and press Ctrl + C.
Congratulations - you have successfully configured OpenVPN manual connection! As long as you’re connected, your location is private, and your sensitive data is secure.
I used the following:
wget -O - -q https://icanhazip.com/
Here is link: https://support.surfshark.com/hc/en-us/articles/360011051133-How-to-set-up-OpenVPN-using-Linux-Terminal
How to set up manual OpenVPN connection using Linux Terminal?
In this tutorial, you will learn how to set up an OpenVPN connection on your Linux device. This is an alternative way of connecting to Surfshark servers that will come in handy if the Surfshark VPN app can not be installed on your device or it does not perform as expected.
You will need a device running the Linux operating system and an active Surfshark subscription. If you don’t have the subscription yet, you can get it here.
https://surfshark.com/
Get your credentials
Install the OpenVPN package
Download configuration files
Connect to the VPN
This tutorial uses Ubuntu distribution. Please note that some configurations may vary depending on the Linux distribution you are using.
Get your credentials
You will need Surfshark service credentials to connect to the VPN using a manual OpenVPN connection. Do not confuse these with your regular credentials, namely your email address and your password.
Here is how you can get Surfshark service credentials:
Go to this page where all the details required for manual connection are stored.
You may need to log in before proceeding to this page. In that case, enter your email address and your password, then click Log in.
Click on the Credentials tab. You will find Surfshark service credentials there.
It is a good idea to keep this page open for now. You will need these credentials a bit later.
Install the OpenVPN package
Open the terminal window.
You can do that by pressing Ctrl+Alt+T keys or navigating to it in your apps menu.
Enter the following command to install all the necessary packages:
sudo apt-get install openvpn unzip
You may need to enter your computer password to confirm this process. In such a case, enter the password and press Enter.
Download configuration files
Navigate to the OpenVPN directory. You can do that by entering this command:
cd /etc/openvpn
Download the Surfshark OpenVPN configuration by entering the following command:
wget https://my.surfshark.com/vpn/api/v1/server/configurations
Extract the configurations.zip by entering this command:
sudo unzip configurations
Enter the following command to see the list of all the available servers:
ls
Connect to the VPN
Choose one server from the list that you want to connect to and copy the hostname (URL) representing this server's hostname.
Connect to your chosen server by entering this command:
sudo openvpn paste the server name here
For example, if you'd like to connect to the us-slc server, this would be the command:
sudo openvpn us-slc.prod.surfshark.com_
Before you can be connected to the server, you should enter Surfshark service credentials.
Enter the credentials that you collected in the 'Get your credentials' part, and press enter.
If you can see the 'Initialization Sequence Completed' line in your terminal, you have successfully connected to Surfshark!
To disconnect from the OpenVPN connection, open the terminal and press Ctrl + C.
Congratulations - you have successfully configured OpenVPN manual connection! As long as you’re connected, your location is private, and your sensitive data is secure.